 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
05-03-2006, 02:49 PM
|
#1 | |
|
AF Regular
 Join Date: Jan 2006
Location: iowa city, Iowa
Posts: 116
Thanks: 0
Thanked 0 Times in 0 Posts
|
99 Neon-CEL on and here's the fault code
The car is a 99 Neon with the 2.0 SOHC with auto trans and 67,000 miles. The CEL light came on and I pulled the faults codes with my OBDll reader. The code it threw was PO108. Looked in my repair manual and it says "map sensor voltage too high" My first thought is to replace the MAP sensor but also read where the problem could be something else that's tripping the map sensor code. Now in the past week the CEL will go out and also come back on. What would you do? Thanks for the help!
|
|
|
|
|
05-04-2006, 08:53 AM
|
#2 | |
|
Tuning Neons since '97
 Join Date: May 2005
Location: Houston, Texas
Posts: 3,104
Thanks: 0
Thanked 15 Times in 15 Posts
|
Re: 99 Neon-CEL on and here's the fault code
I'd check the wiring to it and make sure everything is OK and the sensor is seated correctly. After that pull the fuel pump fuse in the PDC to reset the PCM. If the code comes back then I'd change the sensor.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
