|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Off-Topic Talk about anything other than cars. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
||||
|
||||
|
Ok let me tell you all right now i only need the idler bearings for the 2 pulleys but this is the cheapest way i could find them!!! So what do you think about these. Would you buy them? I need them really soon i want to get the engine completed and this is the only thing holding me. Well besides i have to find a 1g waterpump pipe that goes to the thermostat housing. Thanks Guys
Neither one of these are genuine parts they are both aftermarket, I emailed them both to ask. But both say they sell alot without any problems. Here are the 2 on ebay. http://cgi.ebay.com/ebaymotors/DSM-E...QQcmdZViewItem http://cgi.ebay.com/ebaymotors/89-99...QQcmdZViewItem
__________________
Current Cars 2006 Eclipse GT 6 speed MT (V6 3.8), mods so far- S Tech Springs, after market 18's, 2012 headlight Conversion, Greddy cat back exhaust, CAI, RRE Headers, Polyurethane Motor Mounts, NX Nitrous kit at 100 shot for now, RPM Window Switch, Triple Pod. 2003 Grand AM GT - official beater car for the winter lol ---------------------------------------------------- 95 TSI AWD [email protected] (T-25) Now fully Modded engine with 3,560 miles on it.SOLD |
|
#2
|
||||
|
||||
|
Re: I need advise plz!!! What do you all think?
People say not to trust ANYTHING other than OEM when it comes to timing belt. You wouldn't want your new built up motor to get completely fucked because you saved a few $$$ and went ebay on that shit.
__________________
'92 3000gt SL Zoom Stage 1 Clutch Quote:
|
|
#3
|
||||
|
||||
|
Re: I need advise plz!!! What do you all think?
well....,sometimes the cheap shit actually works. might want to do some research on dsmtuners.com
__________________
-1997 Eclipse Spyder GST |Stock| -1990 Eclipse GSX |ACL Main & Rod Race Bearings|Balance Shafts Removed|ARP Head Studs|Cometic HG|FP 20g TDO6H|EPROM Chipped (stutter box 5k, fuel comp.)|PTE 680cc inj.|Walbro 255 HP Fuel Pump|Autoteq FPR|SAFC 2|FMIC|2g MAF|Dejon Tool Hard Pipe|Greddy Type S|MBC at 17PSI|Ported 2g Exhaust Manifold|02 Housing w/ Tial 38mm WG|Full 3inch Exhaust w/ Y-pipe Cutout|Fidanza Flywheel|ACT 2100|4 Bolt LSD Rear|Poly Mounts|KYB AGX Suspension|Roll Bar| |
|
#4
|
||||
|
||||
|
Re: I need advise plz!!! What do you all think?
I bought my balance shaft eliminator kit from them for my 6-bolt. I havn't installed it yet, but I am pretty sure that its sitting inside my car at my parents house. I also bought this timing and waterpump kit for my 6 bolt. Timing Kit
__________________
Got AWD? Some people buy super cars, other build them ![]() ----Click It, For Mods and Pics---- '95 Mitsubishi Eclipse GSX - For Sale '05 Volkwagen Golf GLS TDI - My daily driver '03 Ford Excursion 6.0L PSD 4x4 '13 Ford F150 FX4 SCREW 4x4 3.5L EcoBoost '08 Buell 1125R '83 GMC Sierra Classic K2500 4x4 - Future Cummins Swap |
|
#5
|
||||
|
||||
|
Re: I need advise plz!!! What do you all think?
Im not using any of the belts, i just need the idler bearings for the timing belt. Everything to do with the balance shaft shit and the timing belt can just go in the garbage or just sell them to someone really cheap!!!! So your saying you would not trust the bearings?
__________________
Current Cars 2006 Eclipse GT 6 speed MT (V6 3.8), mods so far- S Tech Springs, after market 18's, 2012 headlight Conversion, Greddy cat back exhaust, CAI, RRE Headers, Polyurethane Motor Mounts, NX Nitrous kit at 100 shot for now, RPM Window Switch, Triple Pod. 2003 Grand AM GT - official beater car for the winter lol ---------------------------------------------------- 95 TSI AWD [email protected] (T-25) Now fully Modded engine with 3,560 miles on it.SOLD |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|