engine swaps

[95_probe]

i was just wandering what engines could be swaped into a 91 laser. not afraid of mild fab work. any respnse would be appreciated

[95_GSX]

Originally Posted by 95_probe

i was just wandering what engines could be swaped into a 91 laser. not afraid of mild fab work. any respnse would be appreciated

First off welcome to the forums. Let me introduce you to the Search Button. It is located at the upper right-hand side of the page, just above the threads and just below the page number/jump icon. This question has been asked many times so you shouldn't have any problems finding an answer. I can save you some time though, if your looking to put a turbo motor into an N/A car it isn't worth the effort or the money. sell it and buy a turbo car to begin with.

I hope this helps you out.

[ez1286]

If the car is n/a you can swap a 4g63t engine in cause you ave the n/a version so it should be pretty simple. SEARCH and you wil find all the info you need.

[Thor06]

Actually, the NT 1g's have a 4g63 without the turbo. I wouldnt just bolt up the turbo shit to it though, the pistons and cams are different. It wouldnt be hard to swap in a turbo 4g63 at all.

[95_GSX]

Originally Posted by Thor06

Actually, the NT 1g's have a 4g63 without the turbo. I wouldnt just bolt up the turbo shit to it though, the pistons and cams are different. It wouldnt be hard to swap in a turbo 4g63 at all.

Some did and some came with a 1.8 liter SOHC. So it depends on what he has. But we all know its more cost effective and less of a headache to just sell an N/A and buy a turbo DSM to start.

[Black99GST]

True that!