|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Reply Quickly!!
Alright, I'm going to have my gears/LSD/install kit installed today, but the chip has not arrived yet. PCMforless.com had some difficulty with my chip and it won't be here until friday. If I get my gears changed today, and if I drive the car I know the speedo will be off, but will it damage my car in any way? Will it still run fine? I don't know if it will hurt my car without my retuned chip.
Thanks! Kevin |
|
#2
|
||||
|
||||
|
Re: Reply Quickly!!
It'll be fine, all your changing is the gear ratio
But do you have a chip in it at all? |
|
#3
|
|||
|
|||
|
Re: Reply Quickly!!
Yeah the stock chip.
Someone said that they were going to redo my shift points. I just want to make sure that won't harm the tranny since they will not be reprogrammed. |
|
#4
|
||||
|
||||
|
Re: Reply Quickly!!
Oh, that's right, yours is a newer model. Ummmm, I would think the PCM would adapt to the best of it's ability and atleast let you get home, probably wouldn't be a good idea to turn up the loud pedal until recalibrated for the new drive line and final ratios are in the tables.....
|
|
#5
|
||||
|
||||
|
Re: Reply Quickly!!
Yea....mines got 3.73's and the speedo is way!!!!! off, and I have no interest in getting it back to normal....lol
__________________
91 RS Camaro V8 305 TBI cold/ram 14"/3" open element K/N filter 3.73's B&M Megashifter 180 thermostat Flowtech TERMINATOR Exhaust 3" exhaust cutout Silvania Silverstar Headlights Ronal R15 Firehawk Wheels Hankook Ventus Sport (front) Sumitomo HTR+ (rear) 275/40ZR 17 all around... _____________________________ |
|
#6
|
||||
|
||||
|
Re: Reply Quickly!!
You'll be totally fine, as long as you don't go WOT. No worries... when I put in the 3.42s (from 3.08s) I drove around for a month + with it off
Quote:
__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later. 194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies 179.75 RWHP, 204.52 RWTQ ON ITS WAY: MORE R.I.P. Andy 87 Benz 190e - DD 01 EX250 - still gotta get my license for this thing |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|