GSR hard

powerlitepro77h · #1 01-19-2006, 10:04 PM

I have a gsr head that I would like to use on a 2.0 b20b 97-00 block out of a CR-V. Will these bolt on or will it require machine work. How much hp will this combination produce. I tried to match this head to a b18b1 but was going to cost $2200

CivicSpoon · #2 01-19-2006, 11:48 PM

the b20b is the same thing as a b18b1, only it's bored out to 84mm (where the other b-seriers are 81mm).

iVteC_PoWeR · #3 01-20-2006, 07:02 AM

mating a b20 block with a vtec head will be the same as the b18b with a vtec head...both are a bitch...as for how much hp it will make it all depends on how the b20/vtec is setup

89B20CRX · #4 01-20-2006, 05:23 PM

Why not get the B20Z block.

CivicSpoon · #5 01-20-2006, 05:45 PM

Quote:

Originally Posted by 89B20CRX

Why not get the B20Z block.

It'd still be the same problem, there's no difference in the short blocks other than slightly higher compression pistons (and they're not that much higher compression).

powerlitepro77h · #6 01-21-2006, 10:16 AM

I would love to buy a b20z, do you now were I can buy one for less than $1000. I have 3 motors now and I dont realy need to buy another motor. I would be willing to make you a trade.

POST REPLY TO THIS THREAD