 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Technical Discuss Engine, Suspension, Drivetrain, and all other technical issues here. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
11-24-2005, 05:39 PM
|
#1 | |
|
AF Newbie
 Join Date: Nov 2005
Location: enfield, Connecticut
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
|
Camshafts
i heard that if you take out the camshafts from an Altima with the KA engine and put it into the 91 240sx hatch (KA24DE) you'd make more power and the cams would lift and stay open longer? Is this true, and if so how much power would you be making, also which Altima comes with the KA engine?
|
|
|
|
|
11-24-2005, 07:14 PM
|
#2 | |
|
240SX Guy
 Join Date: Feb 2004
Location: melrose, Florida
Posts: 3,994
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Camshafts
Better off finding a 240sx exhaust cam and putting it on the intake side. I forget whether its the exhaust or intake cam from the altima engine you can put on the intake side of the 240sx KA, but one side has the distributor gear on it, so its a no go for that one. The other side's cam can be used on the 240sx KA intake side.
you end up with a 248, 248 setup either way you go... The 240sx setup stock for 91-94 is 242 intake, 248 exhaust. 240sx for 95-98 is 232, 232. Altima is 248 248.
__________________
-Cory 1992 Nissan 240sx KA24DE-Turbo: The Showcar Stock internals. Daily driven. 12.6@122mph 496whp/436wtq at 25psi |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
