|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| E Series Forum covers questions and discussions regarding Ford E-150, Ford E-250, Ford E-350, and Ford E-450. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Mar 2006
Location: princeton, West Virginia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 e250 no start condition
help, I have a 95 e250 with a 6 cyl. it won't start, cranks fine, has spark at the plugs, 55 psi fuel pressure with the key on, the fuel pump runs all the time that the key is on, it don't cut off after two seconds. with the original computer I had injector pulse while cranking, with the new computer I have no injector pulse. I don't know what to do next. thanks, jimbo
|
|
|
|
|
|
|
#2 | |
|
AF Enthusiast
![]() Join Date: Jan 2004
Location: Under a Truck
Posts: 1,496
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: 95 e250 no start condition
1) The "new" computer is bad.
2) Do you have any compression? 3) Will it run on Ether? (If so the ignition system and cam gears are ok) 4) It is "never" the computer. |
|
|
|
|
|
|
#3 | |
|
AF Newbie
|
Re: 95 e250 no start condition
check for ground at the battery, a small wire leads to the fuel pump relay under the pass., side of dash, if it is loose ,,, no start
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|