|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Cam Sensor and Synchronizer Repair
I had a check engine code apear and the diagnostic from the dealer was the Cam Sensor and Synchronizer. They want $440 to do it. I think that is outragous when the sensor is only $25 and the syncronizer can be had around that price too probly. Do you gents have any suggestions on the repair/part numbers/advice/or just anything to be helpful. Thanks alot
Mike |
|
#2
|
|||
|
|||
|
Mike-
I had this done on my '98 Taurus, but mine was the crank sensor and synchronizer. It cost me $265 at AAMCO and they gave me a year warranty against that code, which was PO340. Try them out. $440 is ridiculous, but that is a dealor. |
|
#3
|
|||
|
|||
|
There are a lot of discussions on this forum concerning the cam postion sensor. Perform a 'Search in this forum' for 'cam sensor' and you will have the answers you need.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|