|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Regular
|
just bought a 93 wrangler
last night I picked up a 93 wrangler, it's got the 4.0 6cyl, with 5spd manual trans. the spedo and odometer do not currently work. dose anyone know if the 93's used a actuail spedo cable, or if they use a sensor ???
thanks, Keith
__________________
when all else fails, get a bigger hammer. ![]() Vehicles: 2005 suburban 1500 4x4 all stock, ex-fire department truck. 1987 Grand Wagoneer |
|
|
|
|
|
|
#2 | |
|
AF Newbie
![]() Join Date: Jul 2005
Location: Youngstown, Ohio
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Mine doesn't work, either. I have a '93 Wrangler with a 2.5 / 5-speed. Must be kinda common. I believe these Jeeps have a speed sensor, and electronic speedometer, not a cable. I haven't fixed mine yet, so I'm not positive, but that's what I was told.
|
|
|
|
|
|
|
#3 | |
|
AF Newbie
Join Date: Aug 2005
Location: Westland, Michigan
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: just bought a 93 wrangler
I had the same problem on my 92 and found the problem to be the printed circuit on the back of the speedo.
I just made a jumper and fixed mine. |
|
|
|
|
|
|
#4 | |
|
AF Regular
Thread starter
|
Re: just bought a 93 wrangler
pat8942,
could you give me some more information on those jumpers you made? thanks, Keith
__________________
when all else fails, get a bigger hammer. ![]() Vehicles: 2005 suburban 1500 4x4 all stock, ex-fire department truck. 1987 Grand Wagoneer |
|
|
|
|
|
|
#5 | ||
|
AF Newbie
Join Date: Aug 2005
Location: Westland, Michigan
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: just bought a 93 wrangler
Quote:
On mine I had no ignition feed to the speedo so I made a jumper to connect the ignition feed from the tach to the ignition feed of the speedo and tucked the wire in the groove at the bottom of the cluster. You can use an ohm meter to check continuity between the plug and the speedo and that will tell you how to fix it. Hope this helps http://files.automotiveforums.com/ga...82DASH-med.JPG |
||
|
|
|
|
|
#6 | |
|
AF Enthusiast
![]() Join Date: Nov 2004
Location: ontario
Posts: 648
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: just bought a 93 wrangler
go under the jeep and locate the speed sensor, if its a cable, then its a cable, if there are just wires, then its not a cable....
|
|
|
|
|
|
|
#7 | |
|
AF Regular
Thread starter
|
Re: just bought a 93 wrangler
well, I did finally get around to crawling under it to check out the spedo. it's just wires and a sensor, and the wires all look to be ok under the jeep. hopefully this weekend I'll have time to pull the dash and check the wires there.
pat8942, thanks for the diagram, I'll check that out this weekend as well. hopefully putting in a jumper will take care of it, but if not, I think I may need to find a new spedo.
__________________
when all else fails, get a bigger hammer. ![]() Vehicles: 2005 suburban 1500 4x4 all stock, ex-fire department truck. 1987 Grand Wagoneer |
|
|
|
|
|
|
#8 | |
|
AF Regular
Thread starter
|
Re: just bought a 93 wrangler
many thanks to pay8942!!!!
I pulled the part of the dash with the spedo, tach, and message display, and installed a jumper like you described in the diagram, and my spedo is now working again. thanks again, Keith
__________________
when all else fails, get a bigger hammer. ![]() Vehicles: 2005 suburban 1500 4x4 all stock, ex-fire department truck. 1987 Grand Wagoneer |
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|