New Radio

[Dyno247365]

My car needs a new radio for the big trip! I don't know how to get the old one out...how do I? I see slots on the sides, do I use screwdrivers?

I can't take off the faceplate on this one. it's a 3yr old Jensen CD/Stereo.

[240SXSlideStar]

You pop out the plastic trim piece that goes around the shifter and radio, careful, the mounting tabs are fragile, then you take out the 4 screws holding the headunit in place, supppperrrr easy.

[Dyno247365]

Originally Posted by 240SXSlideStar

You pop out the plastic trim piece that goes around the shifter and radio, careful, the mounting tabs are fragile, then you take out the 4 screws holding the headunit in place, supppperrrr easy.

Yeah I grabbed my haynes manual, flipped around a bit and found taking apart the trim, but I didn't know the bottom compartment was attached also.

I've d/ced two connector but I can't find a tool or socket for the small screw in the middle.