|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
05-10-2005, 10:55 PM
|
|||
|
|||
problems with car....unknown
hey everyone.....
i just got my car on the road and i have been driving it everyday so far and i have found that every so often when i start my car that the ECU code light is on solid, the engine light is on and it wont rev past 3000rpm because its in limp mode... does anyone know what may be causing this issue and a fix for it??? any ideas let me know as of right now i unplug the ECU for a bit and plug it back in and it seems to work fine thanks Mike P.S - its a 91 Civic HB running a ZC with a PM6 ECU 
|
|
#2
05-11-2005, 01:42 AM
|
||||
|
||||
|
Re: problems with car....unknown
well, its got to be giving error codes of some sort, check those and get back to us with that
__________________
over 10 grand in parts, and about 300 hours of labor, and i only spent 3k. and then Katrina filled it with mud.
|
|
#3
05-11-2005, 06:26 AM
|
|||
|
|||
|
Re: problems with car....unknown
yeah its a solid light....as soon as i turn the key on and start the car the code light is solid and the engine light is on
let me know thanks Mike
|
|
#4
05-11-2005, 08:03 AM
|
||||
|
||||
|
Re: problems with car....unknown
ECU busted mabey
__________________
The name's Adrian 1990 Civic HB Si - 265.7whp/223tq @9.2psi. Tuned on NepTune by J.Mills 1991 Civic Sedan DX - 296.3whp/230tq @1bar. Tuned on NepTune by J.Mills 1991 Civic Sedan DX - 185.8whp/139tq. Tuned on NepTune by J.Mills 2006 G35 Coupe 6MT - Stock 2011 CR-Z - Stock
|
|
#5
05-11-2005, 11:29 AM
|
||||
|
||||
|
Re: problems with car....unknown
I've never seen a solid light before. Hit me up if you need a replacement if you think that one is bad, and I'll take that one and get it chipped - he he
__________________
1991 Sedan LX Auto (Auto2Manual / MPFI / OBD1 conversions complete) www.naytontech.com :: youtube.com/naytontech
|
|
#6
05-11-2005, 12:02 PM
|
||||
|
||||
|
Re: problems with car....unknown
sounds like the ECU to me
__________________
over 10 grand in parts, and about 300 hours of labor, and i only spent 3k. and then Katrina filled it with mud.
|
|
#7
05-11-2005, 02:57 PM
|
|||
|
|||
|
Re: problems with car....unknown
Yea I belive a solid light usually means ECU is bad... Check the plug make sure its tight... U can also unplug it for about 10 min and plug it back in and reset it... See if that helps...
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
