92 grand am no start

[cleto]

My 92 grand am with 3.3L v6 died a couple of days ago i replaced the cranksahst sensor thats on the crank pulley because i had no spark, it ran fine for 2 days then it died again. So again i had no spark i replaced the crank sensor again but now i still dont have no spark. im thinking now it could be the ignition module but i wanna be sure before i spend 150.00 dollars could somebody give me some advice. P.S is there an easy way of installing the cranksensor to fit perfect on the pulley man it was a pain in the but. well thanks people

[GTP Dad]

The ignition module would be the most likely culprit. You may want to try to find one at a local wrecking yard to try before you spend the big bucks on a new one. Of course you risk getting a bad one but it will probably only cost 25 bucks as opposed to 150 bucks. Just an idea!