ZC Engine Specs

[reXem]

Hey... I was hoping someone here would be able to help me out. My buddy has a program called Dyno 2000 and it estimates hp and torque given info about an engine. so what I need are the technical specs for the ZC Engine. Here is a list:

1) Bore and Stroke
2) Intake and Exhaust Valve size (inches)
3) Compression Ratio
4) Induction flow (cfm) @ X inHg
5) Lifter Type
6) Cam specs @ Seat-to Seat
7) Intake Lift @ Valve (inches)
8) Exhaust Lift @ Valve (inches)
9) Lobe Center
10) Valve Overlap
11) Intake Duration
12) Exhaust Duration


Thanks

[SiRedge]

Hi. Don't know all of those specs for the ZC, but I can give you what I know. I've got a JDM 4th gen Civic Si...

130ps(very similar to hp) @ 6800rpm
14.7nm @ 5700rpm
Displacement: 1,590cm cubed
Inside diameter x distance (mm): 75.0 x 95.0
Compression ratio: 9.5
Gear ratios:
Gear Manual Auto
1 3.250 2.705
2 1.944 1.500
3 1.346 1.027
4 1.033 0.780
5 0.878 -
R 3.888 3.933

Gear ratios could be different depending on what you get the ZC out of. Um... Looking back I don't know if that'll help you at all, but hey, I tried
Redge