|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
In God We Trust
![]() |
question for anyone who knows regarding the 3.1L V6
Hi all. I know this is gonna make me sound like a neat freak, but i just changed the oil in my 2001 Chevy Lumina sedan, and I noticed that the engine compartment was kinda getting dirty. I was wondering if I am able to just spray it out with water at the car wash, or is this going to hurt it at all? (rust) (electrical) (plugs & wires) Its just basically built up dirt and dust. Any ideas? Considerations? Thanks.
|
|
|
|
|
|
|
#2 | |
|
Lactose the Intolerant
![]() Join Date: Aug 2004
Location: Nowhere, Missouri
Posts: 6,410
Thanks: 4
Thanked 52 Times in 51 Posts
|
Re: question for anyone who knows regarding the 3.1L V6
I do. I don't make any effort to protect anything, just don't blast the alternator or coil packs point-blank. Everything else is fair game. Never had any troble. Make sure you drive a good long ways after, so there is no standing water left.
__________________
You made three mistakes. First, you took the job. Second, you came light. A four man crew for me? F**king insulting. But the worst mistake you made... ...empty gun rack. |
|
|
|
|
|
|
#3 | |
|
In God We Trust
![]() |
Re: question for anyone who knows regarding the 3.1L V6
k, thank you. I just needed some input. Tomorrows the day. Thanks
|
|
|
|
|
|
|
#4 | |
|
AF Regular
![]() |
Re: question for anyone who knows regarding the 3.1L V6
Something you might try that I did when I bought mine was spray everything cept the above mentioned electrical components with SIMPLE GREEN and let ti sit for a couple minutes and then just take a garden hose and run the water over the engine. Worked awesome for me.
|
|
|
|
|
|
|
#5 | |
|
In God We Trust
![]() |
Re: question for anyone who knows regarding the 3.1L V6
good idea. thanks
|
|
|
|
|
|
|
#6 | |
|
Lactose the Intolerant
![]() Join Date: Aug 2004
Location: Nowhere, Missouri
Posts: 6,410
Thanks: 4
Thanked 52 Times in 51 Posts
|
Re: question for anyone who knows regarding the 3.1L V6
I will sometimes spray the DIS and wiring with WD-40 before wetting it, a habit from the old distributor days. That would keep water out of the cap and wire boots, but I stopped doing it on this car, and it doesn't seem to care. It starts right up and runs perfect.
Simple Green is good. The best I've used is a product called "STEAM", I think they have it at AZ. It's a big black can with silver lettering. On a warm engine, it really melts the crud. Stinks for about a week after, though.
__________________
You made three mistakes. First, you took the job. Second, you came light. A four man crew for me? F**king insulting. But the worst mistake you made... ...empty gun rack. |
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|