91 teg engine swapping

[new_teg91]

i have a 1991 integra and i want to do an engine swap on it. I was thinking a B18C1.

Does it fit or can it fit?

[whtteg]

Yes it will fit, you will need all of the following:
GSR ECU
GSR motor B18C1
wiring harness's
mounts
and a manual on your car will help a great deal. I would suggest www.helminc.com for the manual.

[new_teg91]

what if my car is automatic and i want to convert it into manual

[whtteg]

look in the FAQ at the top of the page, post #20 which is the 5th post down on the 2nd page.

[new_teg91]

i went to the FAQ but some stuff about vbulletin came out

[new_teg91]

what tranny do i use for the b18c1 engine

[gsr916]

there is another post almost exactly like this one that is pretty current. I believe whtteg made the point of making sure the tranny you pick is a cable tranny not hydraulic. If you are feeling lucky, look for like a 93 GSR or XSi tranny. You'll be shifting a lot but ur shit will be fast.

[new_teg91]

if i put b18c1 from a 94 teg can i still put the 93 gsr tranny

[whtteg]

Originally Posted by new_teg91

if i put b18c1 from a 94 teg can i still put the 93 gsr tranny

Yes you can. All B series trannies will bolt up to all B series motors.

[new_teg91]

do u think that doing the 5 speed conversion is hard

[whtteg]

Originally Posted by new_teg91

do u think that doing the 5 speed conversion is hard

I have never done the auto to manual conversion personally. I always buy manuals from the start lol. I don't think it would be that hard for you to do if you are able to swap the motor.

[new_teg91]

since im going to do the swap, my car comes with a b18a1 stock, do u think the b18c1 will just be a direct drop in, or do i still have to get different motor mounts???

[new_teg91]

ok so i got some info now together tell me if it sounds good? I buy a b18c1 v-tech engine and i buy either a b16 tranny or a 93 gsr tranny. What do you think?And will the b18c1 do a direct fit in my engine bay or do i need mounts?

[das_beast]

is it possible to put a RB25DET engine in a 95 teg?

[whtteg]

Originally Posted by das_beast

is it possible to put a RB25DET engine in a 95 teg?

You don't need to ask the same question 3 times, one time will get you an answer. Check one of your other posts you have the answer to your question from civicspoon.