|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-14-2005, 07:01 PM
|
||||
|
||||
Front Mount Intercooler.
ok i want a big front mount (of course who deosnt). BUT the kits are expsensive as hell... so i had the idea to buy a spearco front mount and buy some aluminum pipeing and mandreal bends and put one to gether... but then looking as some of the kits, i though maping it out would be hell on earth... so i thought mabey some one knows where to find a front mount kits for around $$1,500, or know the maping measuremenst and bend degrees for a kit... because lets face it i dont have the patients to do it my self...
so if you know where to get a one for under $2000 or mabey know the maping measurements... could you tell me? that would be nice...
__________________
 Upgrades... To many to list...
|
|
#2
01-14-2005, 07:38 PM
|
|||
|
|||
|
Re: Front Mount Intercooler.
I know somebody that can get you a HKS intercooler kit for i think about 1400 but i am not sure but if you want i can ask him. Here is picture of it.
http://www.hopupracing.com/hksinkitmi30.html
|
|
#3
01-14-2005, 07:42 PM
|
|||
|
|||
|
Re: Front Mount Intercooler.
__________________
A few "bolt on" mods, a couple "cut, smash, hammer, weld, etc" mods, and a couple "why the hell do I need this/what the hell is this" weight reductions.
|
|
#4
01-14-2005, 07:43 PM
|
|||
|
|||
|
Re: Front Mount Intercooler.
Just noticed they are out of stock, but I know there is someone on 3si selling a brand new kit for 1300.
__________________
A few "bolt on" mods, a couple "cut, smash, hammer, weld, etc" mods, and a couple "why the hell do I need this/what the hell is this" weight reductions.
|
|
#5
01-14-2005, 09:25 PM
|
||||
|
||||
|
Re: Front Mount Intercooler.
yeah I just found a great thread on 3si a few weeks ago about some guys custom building their own intercooler kits...if you start searching back from last months threads you may be able to find it, and talk to the guys who did it.
__________________
96 3000gt vr4 -K&N FIPK -Proboost mbc -Cusco front + rear strut bars -Greddy type-s -ATR downpipe -no cats -15Gs, 3sx aluminum pulley, FMIC, SAFC, walboro pump, EVO 560ccs, and Meth Injection Kit all waiting to go in shortly. Your 1996 Mitsubishi 3000GT VR-4 is the 92nd out of the 315 that were made that year. Only 21 of which are exactly identical.
|
|
#7
01-15-2005, 01:26 AM
|
|||
|
|||
|
Re: Front Mount Intercooler.
well this guy, i bought a greddy boost controller and turbo timer from him on ebay and here is his email:
[email protected] I think he said he can get me Greddy, HKS and some other brands. Just tell him what you want when you email him and he will tell if he can get or not. He is a real good seller. On those greddy stuff he gave me free 2 day shipping and he gives real good reasonable prices.
|
|
#8
01-15-2005, 01:50 AM
|
|||
|
|||
|
www.dejontool.com, $1100 i believe
__________________
Daily Driver: 2004 Jeep Grand Cherokee Special Edition 1994 Mitsubishi 3000GT SL-TT Automatic - Black 3.05 L Arias Forged Pistons, Pauter Forged Rods, DR Stage 3 heads, 3SX TD05 kit w/ E16G's, CX Racing FMIC, 550cc injectors, Walbro 255lph pump, + supporting mods 1994 Mitsubishi 3000GT VR-4 - Black Intake & Boost Controller so far 2006 Sea-Doo RXP Supercharged, Updraded SC, IC + supporting mods
|
|
#9
01-15-2005, 04:11 PM
|
||||
|
||||
|
Re: Front Mount Intercooler.
all the sites look great but some are out of stock and one i dont like the set up on it... any more sujestions?
__________________
Upgrades... To many to list...
|
|
#10
01-15-2005, 06:00 PM
|
||||
|
||||
|
i dunno man. you can't be too picky when it comes to finding a FMIC at an affordable price. that dejontool FMIC looks good (although it could be shinier) and the price is killer. If you're looking for a name-brand IC, then you should add at least $500 on top of the dejontool IC.
Also, what does it matter how the IC looks as long as it cools the incoming air? only time you'll see it is through the front bumper. you can always polish the pipes or chrome it out later. but that's just my opinion; i'm for functionality and quality over aesthetics.
__________________
93 3000GT base K&N | long tube headers | 3sx crank pulley| testpipe | Addco front/rear sway bars (3SX) | rear strut bar & front 3-point strut bar (by JonVr4 on 3Si) | solid motor mounts | LSD insert | KYB GR-2 struts | intrax springs | adj. control arms | ss brake lines | 16% taller 5th gear (teamrip.com) | H4 conversion | push-button start | datalogger | HKS S-AFR | PLX WB O2 coming soon: adj. cam gears | bi-xenon HID retrofit
|
|
#11
01-16-2005, 12:12 AM
|
||||
|
||||
|
Re: Front Mount Intercooler.
true but im sorta shakey about buying stuff from sites unknown to me... the kit looks nice but i dont like how that have the ports set up for the front mount... and the kit from dejontool requires the remoding of the horns char canister and what not... i like the one from speedpartsrus.com i like the 14" tall core they have its a ncie set up... 2 in one out... but the prob is they are out of stock and have been for a while and no telling when they will get more in stock...
__________________
Upgrades... To many to list...
|
|
#12
01-16-2005, 01:48 AM
|
||||
|
||||
|
Re: Front Mount Intercooler.
I thought there was a guy selling one on 3SI? Or can't you get on yet? Anyways keep checking 3SI and contact speedparts.
__________________
1995 3000GT VR-4 Installed: ESP front precat eliminating downpipe, test pipe, RF-1008 K&N, Dejon tool Y pipe, 1G DSM BOV, MSD wires, Guted rear pre cat, ISSPRO EV Marine boost gauge, IPO MBC, EGR blockoffs, Palm m515 dataloger setup, NGK iridium plugs, SPEC stage II clutch 500ft/lb, 5300k HID plug and play setup. Soon:Topline Engineering ground wires.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
