|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-09-2005, 08:23 PM
|
||||
|
||||
|
Temperature control question.
I got an 88 Formula 350, heres the situation: I had no vacuum due to a back intake manifold gasket, so I replaced it and I got vacuum back and my heat could blow again. But now it only works on 3 of the 4 fan speeds, if I put it on High it turns off, but the other three work fine. Anyone know what that is?
|
|
#2
01-11-2005, 02:50 PM
|
||||
|
||||
|
Re: Temperature control question.
Sounds like a relay problem.
__________________
RIP Hypsi - I just want to express I will never be the same after having lost such a good friend. You meant alot to me and I feel I am a better person for having known you. Til the day we meet again my friend you will always be in my heart. Mods: Weight reduction (I don't wear underwear)
|
|
#3
01-11-2005, 03:37 PM
|
|||
|
|||
|
Re: Temperature control question.
Sounds like the contacts in the control head to me.
|
|
#4
01-11-2005, 05:02 PM
|
||||
|
||||
|
Re: Temperature control question.
probally a hole in your vaccum lines between the controlls and heater box. or it could be electrical.
__________________
|
|
#5
01-11-2005, 07:51 PM
|
|||
|
|||
|
Re: Temperature control question.
I would check out all three of these possible causes...keep us informed.
|
|
#6
01-13-2005, 09:49 PM
|
|||
|
|||
|
Re: Temperature control question.
it has a high speed resistor on the a/c heater case. usually under hood on the black plastic case near a/c heater is and the hoses go in. it is a little square piece with like a 4 wire plug and two screws holding it in
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
