|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Nissan Cefiro | Nissan Maxima | Infiniti I30 | Infiniti I35 Excellent platform and the good ol' VQ30DE and VQ35DE engines. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Jan 2002
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
firewall
sup guys
man need help to bring a wire from hood to inside.. how can i find a firewall to bring the wire in.. thanks guys |
|
|
|
|
|
|
#2 | |
|
AF Regular
Join Date: Feb 2002
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
|
:silly2: whaaaazzzzzzzuuuuuuppppppp:silly2:
The firewall has rubber grommets with factory wiring going through them. You can carefully drill through or enlarge the opening to feed additonal wiring into the car / under the hood. Seal it with some RTV (silicon gell available at every autoparts store).
__________________
1967 Mustang GTA Fastback 2002 Maxima SE w. six speed trans.
|
|
|
|
|
|
|
#3 | |
|
AF Enthusiast
![]() |
There is a rubber grommet about 3 inches above the fuel filter. Remove that and route away...
__________________
5spd VLSD 15.2@92mph 180hp & 193tq Faster than jOO! A hunting we will go... ![]() |
|
|
|
|
|
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Jan 2002
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
do have to drill any holes???
where the wires will be coming out to?? thanks man.. you guys rock |
|
|
|
|
|
|
#5 | ||
|
AF Enthusiast
![]() |
No, just pull the rubber plug out and route away. Its not very hard to pull out. The wires will come out right behind the dash on the drivers side.
![]() Quote:
__________________
5spd VLSD 15.2@92mph 180hp & 193tq Faster than jOO! A hunting we will go... ![]() |
||
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|