Headlight

[mkvapil]

I replaced a burn out headlight bulb on the passenger side but the new headlight bulb won't lit up. I switched the working bulb from the driver's side to the passenger side and it still won't lit up. I don't see any wires that are out of ordinary. Where else can I look into? This is a '99 Jeep Grand Cherokee laredo. THanks.

[cw823]

Originally Posted by mkvapil

I replaced a burn out headlight bulb on the passenger side but the new headlight bulb won't lit up. I switched the working bulb from the driver's side to the passenger side and it still won't lit up. I don't see any wires that are out of ordinary. Where else can I look into? This is a '99 Jeep Grand Cherokee laredo. THanks.

First thing I would do is take a voltmeter to the harness and make sure you're getting voltage

[Bill P]

You might have corrosion on the terminals, try cleaning them with sandpaper, or a nail file, or anything that will fit in the slots.

[mkvapil]

I just fixed it. It was a blown fuse. I never knew that each headlights(left, right, high, and low) has its own fuse.

[Entropy]

That's a good catch! I'll certainly check the fuses from now on before I ever buy a new bulb.

[jeffstimac]

how did you get into the fuse panel by the steering wheel