p11/10 bumpers, primera taillights

ny93.5g20 · #1 02-12-2002, 09:14 PM

Does anybody know if the p11 bumper fits on a p10? Would it take an unreasonable amount of effort to get one on there?

Also, all the folks with primeras, where would I be able to pick up a pair of your taillights? Just clear/red would be a nice change from the red/yellow.

AznVirus · #2 02-12-2002, 09:29 PM

http://www.l3thalg20.homestead.com/PicsPage2.html

ny93.5g20 · #3 02-12-2002, 09:32 PM

How much work was that?

A380Driver · #4 02-12-2002, 09:46 PM

I really like the P11 cover on the P10. I know its been covered a couple times...but is it pretty easy to do? Or a bitch...can it be done yourself or a shop to do it?

:sun:

ales · #5 02-13-2002, 12:51 AM

Quote:

Originally posted by ny93.5g20

Also, all the folks with primeras, where would I be able to pick up a pair of your taillights? Just clear/red would be a nice change from the red/yellow.

For example, through me at my local Nissan dealer. They're not really clear/red, more like smoked/red.

ni55andriven · #6 02-13-2002, 01:16 PM

Hey Ales, do you know how much the rear tailight set for the P11 is? You guys dont have that ugly plastic strip running along the top of rear tailights right?

ales · #7 02-13-2002, 03:10 PM

Quote:

Originally posted by ni55andriven
Hey Ales, do you know how much the rear tailight set for the P11 is? You guys dont have that ugly plastic strip running along the top of rear tailights right?

Uhhh... you got me there. I have no idea. And aren't the clear/red lights available for the P11 in the US?

I'm not sure what strip you're talking about.

ni55andriven · #8 02-13-2002, 08:57 PM

The plastic strip runs along the trunk door, just above the inner two tailights. It's kind hard to explain. The U.S. tailights have the red on top and the clear on the bottom. Outside the U.S. the colors are reversed (as far as I know). I'm trying to post a picture of the exact tailights I'm looking for but it's not working..But factory smoked tailights would be even better!!

AznVirus · #9 02-13-2002, 11:03 PM

Quote:

Originally posted by ny93.5g20
How much work was that?

not that bad, depends how crafty you are. you have to do a bit of cutting to fit the stock bodyline, and then you have to heat up metal L-shaped brackets with a torch and "melt" it into the plastic for the brackets where the fenders are. not that hard but you need a torch.

TRBOBRK · #10 02-14-2002, 12:47 AM

Which is easier/better result?

Taking off the P10 and mounting a P11.

or

Taking the top half of the P10 and the bottom half of the p11 and glue/bondo them together.

ragt20 · #11 02-14-2002, 04:56 PM

heres a pic of the smoked/red taillights U get in UK/Europe

*pic courtesy of Kev P11GT*

AznVirus · #12 02-17-2002, 02:36 AM

Quote:

Originally posted by TRBOBRK
Which is easier/better result?

Taking off the P10 and mounting a P11.

or

Taking the top half of the P10 and the bottom half of the p11 and glue/bondo them together.

IMO it would be taking off the P10 and mounting a P11.

TRBOBRK · #13 02-17-2002, 03:40 PM

How about adding the Stillen Front???

Should I buy a p11 bumper and mount it to my p10 then add the stillen.

or

Should I glue/bondo the stillen to my current p10 bumper cover.

POST REPLY TO THIS THREAD