|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-27-2004, 02:53 PM
|
||||
|
||||
|
sensors
can someone give me some info on the MAP and TPS sensors? like where I can buy them for a decent price or if all FC's have them and if they are interchangable... I need both for my car and they are 900 bucks from mazda so I'm trying to find somethign more affordable
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines 
|
|
#3
11-28-2004, 02:40 AM
|
||||
|
||||
|
Re: sensors
91 N/a
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines
|
|
#6
11-29-2004, 04:58 PM
|
||||
|
||||
|
TPS sensors
N/A and TII TPS sensors are interchangeable BUT.. S4 and S5 are NOT.
The S4 cars used a single TPS sensor while the S5 cars used a dual sensors. One for range and one for fine. S4 TPS are about $60 from dealer (last time I checked.. a year or two ago) and S5 TPS are about $110-120 (again.. last time I checked). I don't know what they are now. Anyways, I have both S4 and S5 TPS sensors. $20 for the S4 and $40 for the S5. These are used BTW, but all were taken off of running cars/motors.
__________________
-1987 Mazda FC3S TII - dynoed 316rwhp 06.28.04 S5/S6 SP motor w/ HKA T04R @ 14psi CP Racing 4point Roll Bar Cusco ZeroII Coilovers SSR Watanbes RS-8 17x8F:17x9R - 1993 Mazda FD3S Competition Yellow Mica R1 - 1991 Mitsubishi Galant VR4 - daily grind JDM EVO RS motor w/ EVOIII 16G turbo
|
|
#7
11-29-2004, 05:26 PM
|
||||
|
||||
|
Re: sensors
FCSilvia I may want an S5 TPS
J-Rat if you have an MAP that will work for me I' be interested in that too
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines
|
|
#8
12-01-2004, 12:32 AM
|
||||
|
||||
|
Re: sensors
hey I found a site that had the parts so I don't need them anymore, thanks anyway
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
