 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
11-19-2004, 09:02 PM
|
#1 | |
|
AF Newbie
Join Date: Nov 2004
Location: Bamberg, South Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
NX125 idle trouble
I have a '89 Honda NX125 I am currently trying to get back up to par. I have bored the cylinder out .06 and replaced the rings and piston. The trouble I am having is getting the machine to idle. After it gets hot it will idle but hesitates to rev down. It seems like it is catching air but I cannot find any leaks. Have you any thoughts on what could be my problem? Also this carb has a jet on the manifold side, any idea where it should be set? Thanks
|
|
|
|
|
11-23-2004, 10:18 AM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Nov 2004
Location: Bamberg, South Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: NX125 idle trouble
Since nobody has given me an answer, I will post my on. The retaining spring, (not the C clamp) on the throttle needle had moved up the tube enough to give the needle about a 1/4" of slop. This is what caused the poor idling and the slow to return to idle problem.
|
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
