Transmission Swap Parts!!!

[k3smostwanted]

as some of you may know i want to swap my auto tranny in favor of the 5 speed. i need to know, besides the tranny, pedals, and shifter, what else will i need? if someone could just list a bunch of things that would be needed for the install. i know of a few. and if any knows where i can find them, would also be helpful. i will keep researching and see if i can find a layout of the clutch lines and such. thanks guys.

[k3smostwanted]

ok i just read z1motorsports write-up and sent them an email.

any input is still greatly appreciated. thanks

[Zgringo]

Transmission, bellhousing, flywheel, pressure plate, clutch disk, clutch pedal assy and hyd. cylinder, slave cylinder and hyd. lines. shifter and boot with linkage
Depending on which flywheel and bellhousing you use well affect your starter installation.

[k3smostwanted]

ok thanks zgringo...thats eveyrthing z1 had in there write up and they make a complete kit do to the job.

[zfreak_1125]

i just finished an auto to 5sp swap on my z32. actually fairly easy to do...just a lot of interference that has to come out. the only thing you have to worry about is the alternator wiring harness and making the one connector on the manual harness fit with the connector on the car. everything else is pretty straight-forward. if you got any questions, just shoot me an email and i'll explain it to you as best i can. good luck.
[email protected]

[k3smostwanted]

thanks zfreak...when i get into the project i will shoot you an email if i have a snaggle.