|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#2
11-25-2004, 05:39 AM
|
|||
|
|||
|
You didn't state what year. I have a 2001 and a deep pan. But what you need to do is call the dealer and they need to know the VIN # and they will be able to tell you. Just a note, on a 2001 when you pull the filter out, you should also replace the metal rubber seal in the tranny filter housing. This seal should come with the filter. Its a nightmare to get out if you don't have the right tools. I had to borrow a slid weight seal puller from a understanding transmission shop. I do not recommend using a screw driver to pry it out because you can gouge the aluminum housing.Some use a curve pick to work it out. Good luck....
|
|
#3
11-26-2004, 02:33 PM
|
|||
|
|||
|
I bought both deep n shalow filters and just returned the one I didnt use.
__________________
97 Tahoe 2dr- raise = http://www.cardomain.com/id/tahoe_boy619 98 Accord 4dr-droped = http://www.cardomain.com/id/accord_boy619   
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
