headers leak

[1990civicdxhb]

I bought a set of 4-2-1 headers off my friend,the headers did not come with the gaskets,i reused my manifold gasket,& I have straight pipe so I did not have to replace the donut gasket,but its leaking in the middle,where the 4 to 2 meet,I have looked everywhere for the gasket & even ask ebay sellers if they would sell it separtly but they wont,
its not a big leak,but I can hear it when I drive beside a wall or floor it in a lower gear,I thought about getting a wire feed/arc welder & welding it together but thats a little bit of alot to do & $,but if you have any other suggestions or know where to get one at it would be great

[shaddr3]

why not buy one of those gasket kits that you trace and cut?

[1990civicdxhb]

what do they sell them at autozone or somewhere?
where would I get one at?

thanks

[Cjz89civic]

Ya you can get them at auto zone or honda even sells them its about 6"x6" and its just blank gasket materal

[TheSilentChamber]

yeah, if you ever get into pro drag racing, gasket blanks will becoem a good friend of yours. to cut the holes (if you dont have a punch set) you can use empty shells (from bullets), I had a size conversion chart somewhere that showed the differnt sizes.

[Ones&zeros]

auto zone sells this paste type seal if your interested. its for exhaust leaks.

[TheSilentChamber]

dead thread there bob.