|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-02-2004, 04:42 PM
|
||||
|
||||
|
Boring out a dohc zc.....
Anyone know how far a zc block can be bored? Its possible that i might do a lil somethin to one of my engines. So if anyone knows, give me some info.
__________________
ZC stuff http://dh-racing.com http://www.thezcr.com/html/zcbook.php http://dmoore.com/crx/zc.htm http://www.jgenginedynamics.com/HOME%20PAGE http://www.theoldone.com/ 
|
|
#2
10-03-2004, 02:33 AM
|
||||
|
||||
|
Re: Boring out a dohc zc.....
if you can bore a b series 4mm on stock sleeves, i'd say you could probably bore a D16 (ZC) to 77mm atleast, I havent heard of anybody going over 79mm on a d series
|
|
#3
10-03-2004, 08:37 AM
|
|||
|
|||
|
who told you that you can bore stock sleeves to 85mm from 81mm ? because they told you wrong, it is not recommended to bore stock sleeves more then .5mm so 81.5mm on b series. i would assume its around the same with d series.
if you want to go bigger, get it sleeved then you can go alot bigger bore
|
|
#4
10-03-2004, 09:56 AM
|
|||
|
|||
|
Re: Boring out a dohc zc.....
".5mm so 81.5mm on b series"
Then why are pistons sold .020 and .040 oveR?
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
