Done for the year...

[kjewer1]

More car troubles guys. I'm done for this year. Heres a post from the local forum, I made a page on my site with all the pictures and details.

Same thing as last time. Cylinders 1-3 are hosed, while cylinder 4 is fine. Compression is 0-50-0-200. Plugs 1 and 3 are missing side electrodes and insulator. I'm willing to bet the HG blew as well and thats why the water pipe blew out (the bolt was missing of course). Looking at the log, the last half of 4th sucked. Mph certainly suffered, and it explains why there was no gain between 27 and 29 psi. I put together some graphs of WBO2 vs target AFR, that show that the pump was not keeping up with demands. I ran through the numbers in another thread and its right on the limit. All rough math, but its nice to see it add right up and support what's been measured. Here is a page with all the charts and info. No knock other than the usual after the NLTS.

http://www.posracing.net/AFR.html

Time to take a vacation. A long one. Next season I'll have a stronger setup and a more robust fuel system.

[guitarXgeek]

Aw, as much crap that breaks on your car, you sure do have a damn good attitude about it! Well you still ran an 11.3 even with those problems, so that's saying quite a lot! Of course, with a turbo that flows 75 lbs/min, one would have to expect almost everything to break . Anyways, good luck next season, and have fun on that well deserved break from the DSM

[metalhedskater]

good luck with everything...that sux i would be pissed if i were you

[george536]

Good luck

[Shpyder]

wow. good luck. youve got some balls to be talking as calmly as you are about what happened...my life usually starts to fall apart for things like a slightly due oil change on my DSM!

[JoeWagon]

More time for me to be faster than you.

[BlackShadowTSi]

that sucks, i hope you have more luck next season, anyways you were running 11 thats excelent, and how guitarXgeek said "with a turbo that flows 75 lbs/min, one would have to expect almost everything to break ". someone said once "if it's easy is not funny
Good luck.

[kjewer1]

Thanks guys Its not easy to stay cool about it. At one point on the ride home I started to get pissed. But thats what this sport involves. Lots of successes, and even more dissapointments. I am extremely tempted to pull the motor apart tomorrow and see what it needs. But financially, I really need a break. Time to pay some bills so maybe I can actually enjoy the car next year without thinking about the cost as much.

I need a roll cage for running faster than 11.99/11.49 (NHRA/IHRA), large inline pump, move my BOV to the UICP, etc, so I have plenty of work to do. And I need to degree my cams in a bad way, much easier with the motor out anyway! LMAO... Oh well...

[metalhedskater]

well just keep us updated with info and pics for sure...

[JoeWagon]

Yeah, I want to see some pictures of your car. All I've seen is dated, with no CF hood, the ricer symbols.. and no engine bay shots with the new turbo.

[10.5sec92AWDTALON]

Sorry to hear about your trouble. Good luck with the rebuild.

[kjewer1]

Just read a thread on DSMlink forums(not sure if non-members can read it, http://www.dsmlink.com/forums/showth...&threadid=2664)

Guy put down 551 whp and 501 tq on a stock 2g 7 bolt bottom end. Sick. But more important he did it with the same airflow as me, but much richer AFR and much less timing. Very interesting! I have a few things I need to try when I get the car back together... I'll also upgrade rods too, I'd like to run nitrous next year.

I'll get some pics of the current setup tomorrow before I tear it apart

[JoeWagon]

I'm actually a member of DSMlink forums now, Kevin Lots to learn... good threads. Anyone that is dedicated to buying DSMlink, has a lot of restraint from posting, and is a serious person should consider requesting an account there.

[EclipseRST]

holy shit thats nice... too bad your season is over without getting to the dyno to see what the numbers were! looks like you had a good year tho it seems, low 11s is pretty fuckin nice man! i would cream for a low 11 time slip right now... but my season is over for the RST and just beginning for the GST although i am selling it rather quickly here, just have to finish up the contract and its gone. working on a stroker motor right now, getting the block bored .040 over, eagle rods, 4g64 6 bolt crank, and wiesco 8.5:1 pistons - i cant wait!

[NOFX0617]

Originally Posted by JoeWagon

More time for me to be faster than you.

lol that goes for me too. hopefully i will have my GSX here within the next 2 months and i can finally see what it feels like to be boosted. sorry to hear about the car though. good luck with the re-build and have a nice vacation.