|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
06-08-2004, 11:37 PM
|
|||
|
|||
98 d16 (not a b16) into 88 crx si
i have an 88 crx si and i put a 98 d16 engine in it only to realize that the engine mounts do not work from the old engine are there mounts other there that i can buy or do i have to weld ones in from a 98????????? i have been trying to figure this out for a long time and i have no idea
|
|
#2
06-09-2004, 12:05 AM
|
||||
|
||||
|
Re: 98 d16 (not a b16) into 88 crx si
D = D do a search on d16y8 or what ever it is. This has been talked about here ALOT. The motor mounts are the same. Your tranny will bolt up. the only thing you have to change to make it right is doing the OBD2 wiring. DO A SEARCH ON THE D16?? <insert your motor here the #'s are on the front side of the block>
__________________
Mods: D16Z6 Turbo'd P28 ecu and Greddy emanage for fuel.  FWD tire smokerMy first Civic love Died from 92 year old Fart not watchin out.   
|
|
#3
06-09-2004, 08:59 AM
|
||||
|
||||
|
Re: 98 d16 (not a b16) into 88 crx si
you CAN't use the tranny from the 98 civic. It won't bolt up. Use ur old tranny. Put ur driver's side mounting bracket on the 98 motor. Then ur all set.
__________________
Jumper harnesses, mpfi conversions, engine harness conversions, vtec subharnesses, etc.
The absolute lowest prices at the absolute highest quality. Trusted. Guaranteed.  Click the image above to visit our online store! Hastings Bseries and Dseries piston ring kits (inc. ZC) - $49 shipped
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
