Lumbar and seat memory

[Johnchase]

Neither the driver's side lumbar or the seat memory controls respond. Is there a fuse/breaker that control both? Do these controls pass through a common connector? If it is a fuse/breaker, where is it located. Thanks

[bustedratchet]

The common place I would check is the wiring harness tube from the drivers door to the body. Checking for a possible broken wire.

[Johnchase]

Thanks for the reply. I'll check the cable. I also noticed a connector dangling under the dash. I'll have to pull the lower cover to see where it connects. Should any connectors be dangling??

[Auror_AH]

I have a problem with my seat memory it only kind of 1/2 works... the mirrors move and the seat moves back and fourth but the back doesn't change... any ideas?

[dsatt12]

It is my understanding that the back of the seat doesn't move with the memory function, just front/back, tilts, and the mirrors. Either that or mine is busted too

[Auror_AH]

well that's good to hear... I think...LoL

[dred98]

Originally Posted by Auror_AH

I have a problem with my seat memory it only kind of 1/2 works... the mirrors move and the seat moves back and fourth but the back doesn't change... any ideas?

My owner's manual says that the memory controls the positions for the mirror and the driver's seat cushion - it doesn't change the recline position or the lumbar supports.

[Auror_AH]

I am really suprised... My Mark VIII changes everything... although I guess it's consoling that my seats not busted... okay my drivers seat isn't busted the passanger seat - another story. That's the one that doesn't go back or fourth...