crx/civic si tb & im lines were do they go??

[pimpcrx_kid]

somehow i mixed up my coolant lines on the throttle body and intake manifold does anyone know where the coolant line on the throttle body goes too?? or the spout sticking straight up on the intake down by the fuel rail and injector??also therers like to factory welded metal lines(2 of them by the cold air intake),and one of those is disconnected and coolant is coming out of there too...im not talking about radiator lines i mean the littler ones...i have too hoses discontected and 1 spout...plz someone help me with a pic or diagram or sumthing..

set up ...
crx dx shell
b15b7 block
d16z6 head
d16a6 ecu,intake maniifold and throttle body-TB IM,dizzy,
n a car that doesnt run YET

[superbluecivicsi]

pix would be very helpful.

host photos through places like photobucket.com.

then, insert image by clicking on image button on af then paste the url.

[pimpcrx_kid]

Originally Posted by superbluecivicsi

pix would be very helpful.

host photos through places like photobucket.com.

then, insert image by clicking on image button on af then paste the url.

i cant get a camera but i can explain where im talking about ok at the thermostat it goes (like lookin at the motor sideways) radiator hose first then 2 heater hoses then a small hose, to be more exact the small hose is on the "water pump inlet pipe"....... (the small hose is the one thats not connected..)

[superbluecivicsi]

there should be 1 hose from block to TB. then TB to IACV.

[pimpcrx_kid]

Originally Posted by superbluecivicsi

there should be 1 hose from block to TB. then TB to IACV.

is that it?
there 2 coolant lines on the back of the block,2 on the throttle body???do you have a diagram or something?or pic

[superbluecivicsi]

just start with your TB. there are two nimples for coolant.one goes to the IACV. the other goes one goes to the small nimple on the block. do you have it like that yet?..................yes or no?

[pimpcrx_kid]

Originally Posted by superbluecivicsi

just start with your TB. there are two nimples for coolant.one goes to the IACV. the other goes one goes to the small nimple on the block. do you have it like that yet?..................yes or no?

no were is the small nipple on the block??? the only opening i have is on the intake mani next to a injector under the vtec solenoid.. the one that goes to the IACV is hooked up though.if u got yahoo u can im me - pimpcrx_kid
ok i think i figured this out i looked at a d15b2 block and it seems the d15b7 block has a extra coolant line on the "water pump inlet pipe"(the big huge pipe on the back of the block) now after seeing this i might add it made me mad as hell too see two coolant lines as i searched online since 10am for the answer,but now my question is do i just block off one of the hoses with a screw lol ??