|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-03-2004, 08:01 PM
|
|||
|
|||
|
Who in the world would do this to a stang?!?!?!?!?!
This has to be the most bizarre thing I have EVER seen done to any car. It is cool in a way, but at the same time just plain stupid. Check it out:
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6236
__________________
1990 LX Convertible: http://www.cardomain.com/memberpage/810219 Edelbrock Performer heads/intake, crane 2040 cam, and all the bolt ons... 
|
|
#3
03-03-2004, 09:08 PM
|
||||
|
||||
|
Somebody needs to have there A$$ kicked. I just cant decide if its the idiot that made this or the idiot that bid on it..................OK both of them.
__________________
Ported Cobra Intake, Ported & polished Windsor Jr heads, K&N, Vortech s-trim, 90mm Lightining mass air meter, 70mm throttlebody,1.7 roller rockers, BBK Long tube headers, offroad H-pipe, Crane cam, main cap girdle, 40 series flowmaster, 3.73 gears, MSD ignition, CGS subframes, A9L PIH kit, SCT custom burned chip, 42lb injectors, 190lph fuel pump, T rex and fuel pressure regulator, AFCO racing radiator (If it doesn't scare the Hell out of you it isn't fast enough)
|
|
#4
03-03-2004, 09:58 PM
|
|||
|
|||
|
LOL, the starting bid is $15,000. You could buy three decent fox body stangs for that much! The thing looks like a death trap on 3 wheels! It can't be street legal.
__________________
1990 LX Convertible: http://www.cardomain.com/memberpage/810219 Edelbrock Performer heads/intake, crane 2040 cam, and all the bolt ons...
|
|
#5
03-03-2004, 10:12 PM
|
||||
|
||||
|
Re: Who in the world would do this to a stang?!?!?!?!?!
I wouldn't take it.And it aint no monster garage project they can't be that stupid.
|
|
#7
03-04-2004, 01:29 AM
|
||||
|
||||
|
Re: Who in the world would do this to a stang?!?!?!?!?!
Quote:
Makes sense,  .
__________________
92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Alum Dished Pistons), B50 Block, Track Heat Intake, Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK EL-CC Headers, MAC O.R. H-Pipe, Flowmaster Cat-Back, Accufab 75mm TB, MAC CAI, BBK Pulleys, Griffin Alum Radiator, Mark 8 Fan, MSD Pro-Billet Distributor; AOD, Dynamic 3300 L-U Converter, B&M Trans Cooler; 3:73 gears.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
Looks like a Monster Garage project gone bad!
