Tazdevs 1997 180sx

[tazdev]

Not sure I have poste this here or not.

Picked up a 180sx type s shell about 5 years ago now, wasn't in the best condition when I picked it up.


shows the damage to the left rear 1/4


First step was having the damaged rear 1/4 repaired and the rust holes in the hatch where the wing was removed patched up


As it had no bumper lights guards or bonnet I decided to go down the path of a strawberry face conversion (s15 front)


purchased some HSD adjustable suspension, adjustable arms and tidied up the rear subframe



Then purchased the engine out of a friends old drift car that he was parting out, sr20det with 550cc injectors and adjustable fuel pressure reg, and a gt2871 off another friends sr20


and how it now sits on Work VS-KF 18x9.5 rear and 18x 8.5 front with final konexxion front bumper, and uras skirts and rear

[tazdev]

getting everything ready for its tune at the end of the week

picked up a Z32 AFM with a broken mount


made up an ali adaptor plate


a bit of silicone and knead it later its all fixed and good to go
Brought a new plug from petroject and wired it in so I now have dual AFM plugs so I can drive with the sr20det AFM then switch over to the Z32 AFM for the tune. Will just need to steal the filter off of the R33 for the day




and a sneak peak at the new exhaust system thanks to Keg @ DKM fabrication

[MetalHeadZaid]

Gay that nobody replied to your thread. I remember when this place was rockin.

Cool car from what i can see, most of the pics are dead..