|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Off-Topic Talk about anything other than cars. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
12-11-2003, 12:02 AM
|
|||
|
|||
|
turbo shaft play
sorry about bringing my civic in the mitsubishi forum but i knew you guys could help me i bought a t25 turbo and was cheacking for shaft play
i dont feel any up and down but on the intake end of the shaft an push and pull the shaft in and out a little is this normal its not on a car so there is no oil in it at all 
|
|
#2
12-11-2003, 12:06 AM
|
||||
|
||||
|
you should have just a little play in it, not a lot though - i mean barely any! and as long as it doesnt move up and down, side to side, and doesnt move in and out very much, you will be fine!
|
|
#3
12-11-2003, 12:36 AM
|
|||
|
|||
|
Re: turbo shaft play
it doesnt move much but when i pull it out it will make a clunk noise so that might be to much
if so where is the cheapest place to get a rebuild kit?
|
|
#4
12-11-2003, 12:42 AM
|
||||
|
||||
|
|
|
#5
12-11-2003, 02:00 AM
|
|||
|
|||
|
Re: turbo shaft play
A rebuild kit is typically 150 bucks. To balance the assembly is at least 25 plus shipping both ways. You can get a new mitsu 2g t25 in good shape for 100 or less. I wouldnt bother rebuilding. If you do, its best to send it out to be done properly, which then costs even more money. Your call though.
__________________
Kevin Jewer RWD Talon - 7.92 at 180 Mightymax - 10.7 at 125
|
| ||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
