 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
10-20-2003, 02:09 PM
|
#1 | |
|
AF Newbie
Join Date: Oct 2003
Location: CI, New York
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
92 Lumina won't stay started!
My 1992 lumina alwayz stalls after 2 minutes of driving or less. Then it will not restart again until several hours later. (There is no spark.) I've replaced the ECM, ICM and crank position sensor already. Still no good. Not sure where to go from here. Any suggestions???
|
|
|
|
|
10-21-2003, 10:28 AM
|
#2 | |
|
AF Enthusiast
 Join Date: Sep 2003
Location: Carson City, Nevada
Posts: 345
Thanks: 0
Thanked 0 Times in 0 Posts
|
My suggestion is the ignition module, located on the underside of the egnine. Replace the crank position sensor at the same time. Though I cannot determine a cause without troubleshooting, this is likely the cause of your problem. Ray
|
|
|
|
|
|
10-21-2003, 10:57 AM
|
#3 | |
|
AF Enthusiast
Join Date: Sep 2003
Posts: 350
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 92 Lumina won't stay started!
He already replaced both of those...as he stated in his first post.
Have you checked your plugs and coils? Check the fuel pressure to make sure that is good. That's all I can think of right now.
__________________
www.wicgp.com <- Wisconsin Grand Prix Club 1999 Black Grand Prix GT Coupe 1990 Red ASC/Mclaren Grand Prix Turbo Coupe 1990 Metallic Blue & Silver Grand Prix LE Coupe 1979 Blue Dodge Ramcharger |
|
|
|
|
|
10-21-2003, 10:20 PM
|
#4 | |
|
AF Newbie
Join Date: Oct 2003
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
92 lumina won't say started
The exact same thing happened to my 92 Lumina last week.Can anyone tell me where the ignition module is located & what it looks like?The parts store said they will test it if I bring it in.Thanks!
|
|
|
|
|
|
10-22-2003, 09:55 AM
|
#5 | |
|
AF Enthusiast
Join Date: Sep 2003
Posts: 350
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 92 lumina won't say started
The ignition module is towards the bottom of the front side of the engine...underneath the front exhaust manifold. It has all the coil packs mounted to it.
It's a pain to get out, and it's a good idea to remember where all the plug wires go.
__________________
www.wicgp.com <- Wisconsin Grand Prix Club 1999 Black Grand Prix GT Coupe 1990 Red ASC/Mclaren Grand Prix Turbo Coupe 1990 Metallic Blue & Silver Grand Prix LE Coupe 1979 Blue Dodge Ramcharger |
|
|
|
|
|
12-15-2003, 09:34 PM
|
#6 | |
|
AF Newbie
Join Date: Dec 2003
Location: Maben, Mississippi
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
What I found
I had this same issue and found that there was some bare wires on the position sensor harness. The wires had oil on them and shorting out.
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
