|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-06-2003, 04:23 AM
|
|||
|
|||
gauge cluster
Does anyone know if gauge cluster are interchangeable? I bought a cluster on ebay because my fuel gauge and temp gauges were not working! I installed the new one and now all of a sudden everything is haywire- like when i turn on my hazard lights they blink on my dash along with the bright light indicator as well as my rpm gauge fluctuates rapidly and my speedometer cuts off- but the i turn my hazards off and my speedometer comes back online! any ideas- it looks like its the same cluster as the one that was stock!
any input would be greatly appreciated! 
|
|
#2
11-06-2003, 04:28 AM
|
|||
|
|||
|
Re: gauge cluster
You must have some wires crossed or some are connected wrong or some wires are shorting out.
__________________
911 Super Targa RSR [Dual Flow Intake][Twin Turbo][Larger List to Come]
|
|
#3
11-06-2003, 05:23 PM
|
||||
|
||||
|
The problem is that you are tring to put a obdII cluster into a obdI car. All you have to do is take the gauges out of the cluster(they are held in by 3 screws) then put them into your old cluster.
The reason that they are functioning wrong is because the wiring on the cluster is different between the obdI and obdII. It is a simple fix, I had to do the same thing myself (indiglo incident  )
__________________
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
