 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Diecast Car Modeling Discuss and show diecast vehicles that you have modified, or that you have collected. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
10-13-2019, 07:48 AM
|
#1 | |
|
AF Newbie
Join Date: Jun 2018
Location: huddersfield
Posts: 75
Thanks: 0
Thanked 4 Times in 4 Posts
|
1/12 diecast VW bus conversation
This is my latest commission project, I have been asked if I could convert this 1/12 diecast model into what is known as the "bullet" bus that was used as target practise as it sat abandoned out in the desert. I will be trying to recreate the model to a similar condition as the photo below, with the rust and old paintwork and of course all the bullet holes.
  I have made a start breaking the model down into smaller pieces, which have then been stripped of their original paint.   The customer also wants the roof windows cut out, so I will now make a start on those and start drilling the holes prior to priming everything ready for paint. Chris http://www.wardsmodelbuilder.com [email protected] |
|
|
|
|
03-23-2020, 04:08 PM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Jun 2018
Location: huddersfield
Posts: 75
Thanks: 0
Thanked 4 Times in 4 Posts
|
Re: 1/12 diecast VW bus conversation
This was intended to be a complete build thread but unfortunately I just havent had the time to keep it updated.
But I do have the project finished for the customer, so here are some photos....      Happy to hear your thoughts, it is a little of an unusual proeject but one I have very much enjoyed. Chris http://www.wardsmodelbuilder.com [email protected] |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
