Rallycross BMW M3 E30 of swedich driver Bengt Ekström base BEEMAX 1/24

[racer1]

Rallycross BMW M3 sports evolution of Bengt Ekström (father of Mattias Ekström both acquainted as DTM driver as World champion rallycross 2016).
The car date from the early 90's, and was a gr A car,2 wheel drive.
I used as a base a Beemax kit where the necessary changes were made.

[racer1]

First of all ,I made the tyres and rims,they 're 3D disigned and printed.

[racer1]

There is no engine in the kit of Beemax.
Therefore I have used the engine of Modellingmaster(Roman),and changed a lot of things,like the inlet manifould,the exhaust and the valve cover.
I made a design in of the valve cover and let it print.

[racer1]

Now I set the engine in the car.

[racer1]

Now I make ,the chassis the roller cage etc.

[corrrado]

Really great build! Great job on the engine!

[racer1]

[LucaC.74]

nice detail on the engine .. and also the rest

[johanthemodeler]

Originally Posted by racer1

There is no engine in the kit of Beemax.
Therefore I have used the engine of Modellingmaster(Roman),and changed a lot of things,like the inlet manifould,the exhaust and the valve cover.
I made a design in of the valve cover and let it print.

Do you print on shapeways? Maybe start a shop there ?

[racer1]

Yes,I make the design and shapeways prints that for me.

[racer1]

Finally he is ready the rallycross BMW M3 evo of Bengt Ekström(father of Worldchampion rallycross 2016 and DTM driver Matias Ekström)
This is definitely not O.O.B. what most model builders build.
The full suspension was changed, the roller cage and the interior were adjusted.
Rims were drawn in 3D and printed like the tires that are also of resin.
The engine comes largely from modeling master, but the valve cover was changed and re-drawn and printed in 3D, as well as the inlet collector....
Finally, the decals are also signed by myself.

[firun]

Looks beautiful!

[LucaC.74]

really great!!!

[lovegt40]

Really nice

[Johan_SWE]

Nice work!