|
03 lesabre wiper motor plug pin out
My wipers turned on by themselves on a slow delay. The wiper control switch works and I can work all of the speeds and delays but not shut them off. They will shut off with the key switch. If I pull the #2 15 amp accy fuse they will stay on the same but I lose control of the speeds. If I pull the #3 30 amp the wipers stay off. I'm assuming it's the motor assembly but I would like to pin test the plug just to make sure the motor is not receiving stray voltage.
Does anyone have the pin out diagram to share?
Thanks,
|
01-17-2017, 09:16 PM
