Porsche 997 RSR No. 80 / 81 'Flying Lizard' LM 2011 (Scale Production / 1:24)

[dieteufel]

Hi Guys

Today I´m able to show you the new transkit from Mike, for the Porsche 997 GT3 RSR.

The kit will released in the january of 2014.

To build a complete modelcar I need the Fujimi GT3R kit.
I will build the great artcars of the "Flying Lizard Team" drove at 2011 at Le Mans.



First a look on the kit



The resine parts



Very important the both rear ends



BBS rims



Different etchparts for all different Porsche 997 cars



Seatbelts straps in 4 colours



Carbondecals and mesh for cover the airvents



Here the magnificent body without any faults
All vents are open.













So now I´m going to start working

All the bests
Sascha

[lovegt40]

nice model (even if everything in your hands becomes nice )
whats the difference between this and Davide DN racing Tk? maybe the entire resin casted body?

[Mikezibit]

Originally Posted by lovegt40

nice model (even if everything in your hands becomes nice )
whats the difference between this and Davide DN racing Tk? maybe the entire resin casted body?

- full body (built by RobiJ)
- new pe set
- exhaust
- AC box
- CF decals
- 4 colours seat belt
- stainless stell mesh
- 2nd rear Wing
- air jack Connector






Mike

[dpbeetle]

Great to see, that this nice kit / body is reissued as a fullbody kit.

Sascha,

Hurry up. I want to see results! ;-))))

I wish you much fun for the next weeks!

[Shunter]

That is some lovely molding there, very neat and tidy. Cool looking model. May i ask price?

[JesusM]

A project to be followed!!

[dieteufel]

Hi Guys

@ Thank you all for your support!

@ Shayne Just ask Mike from Scale Production.

Starting...

I´m thinking most of you knows that both cars have different rear ends.

The "AM" Team (blue) with a split vents



The "PRO" Team



First I´m gluing a bar into the body for stabilising
Then I´m cutting of the part for the "AM" car.





Just along the crimps



2 parts



My tip, check the fitting the rearlight glases before you priming the body



For the "PRO" car you using the Fujimi part



The different rear ends







Now all vent are opened





Both car had used only the upper flaps, so I´m closing the other slots



Then I´m making a master plate for placing the "side lights"
Fist small holes 0,5mm



Then 2,5mm
Later there will take place the etchparts



To be continued...

Best regards
Sascha

[voyageur]

Hi Sascha,

that looks like a very nice TK and a very promising start to an awesome project.
Considering your other work, we expect to be blown away with spotless execution and a mind-boggling amount of details

Best regards
Sebastian

[Shunter]

I am logged in to watch this one come together.....Nice start.

[dieteufel]

Hi Guys

@Sebastian

@ Shayne & Jesus Great blogs!!!

Sascha

[dieteufel]

Hi Guys

Today I´m making the holes of the front lights
First I´m building a master plate



With a small tape I´m fixing the plate on the body, drill a little hole (3,5mm) and remove the rest



And the 2. hole





And finshed



Before priming I´m looking for the fitting between the chassis and the body
This 4 edges have to removed



Then they fits



On the rear side I can using the 2 plug sockets



On the sides I´m gluing 2 sheet strips on the body to fix the 2 parts later.





To be continued...

Best regards
Sascha

[John18d]

Excellent work and explanation Sascha
John

[sam01contact]

Great work Sascha! I can't wait to see the next update!

[lezdep]

Great work ! Thanks a lot for sharing ! Will be very helpful for my future build.

[eyckles]

Hi Sascha,

Nice progress on both Flying Lizard Porsches. What decal set are you using for this build? I would love to make the #81 version.

Best regards
Lesley