|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
07-16-2010, 12:38 PM
|
|||
|
|||
|
motor mount removal
I don't really have any experience removing motor mounts. What is the correct procedure for removing the passenger side mount on a '99 CV with 4.6L? What I can see that looks possible is removing the through-bolt that keeps the upper and lower portions together. I don't see enough clearance to do anything beyond that.
Last edited by killermrob83; 07-16-2010 at 01:51 PM. Reason: additional information added 
|
|
#2
07-16-2010, 06:58 PM
|
||||
|
||||
|
Re: motor mount removal
Check to see if there is a little bolt going down through the outside of the mount. Look down from the top to the outside of the mount. The through bolt comes out the front.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up.  HEY Y'ALL--READ THIS Here are some of our old vehicles for sale. 
|
|
#3
07-17-2010, 07:34 PM
|
|||
|
|||
|
Re: motor mount removal
The through bolt is 10mm X 1.50mm X 90mm with tapered threaded end, and has a 13mm head. Passenger side come out from the front, driver side comes out from the rear. I was surprised how easily they came out after 200k miles in Michigan weather.
Last edited by killermrob83; 07-17-2010 at 07:35 PM. Reason: additional information
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
