Mickey Mouse / Home Mods that youve seen/done that are GOOD

[Xenostalgia]

List off all the Mods you've seen done by either yourself or someone else with no training that actually came out GOOD. Interior/Exterior/Engine/Exhaust/Antenna. Anything! Pics too! Lets see how inventive our real 4g'ers are!

[Xenostalgia]

NO ONE has used a scooped out avacado to drain their oil or sixteen large balloons filled with hellium as a NOS shot? Anything? Come on guys I want to hear your inventive sides!

[DarkImportGrey]

I built a body kit out of cardboard once and cruised the strip...

[Melt]

I rewired my bumper lenses to be fogs with a switch, yet still blink with the blinker ... not very inventive as other people do it, but still something ... I also did the bumper lenses on my moms accord to come on low with the headlights, and then go bright with the blinkers.

Both cars were rewired using 1157 dual fillament sockets.









Edit: I also painted my stock taillights all red using testors candy apple red transparent paint.

[Xenostalgia]

See thats inventive... I... replaced my sparkplugs all by myself ^_^

[H4Bangin]

rear integra lip
front lip made out of lawn edging stuff
piaa fogs where the bumper light used to be
i made a lil thing to direct the air from the grill to where the cold air sits
LED in the third brake light


thats all i can think about for now

[Setanta]

Using the upper front wishbones off an EG Civic to use EG/Integra Struts which have a slightly wider diameter and bolt straight on in place of the EF ones with no mods

[EF You]

oh where to begin

the general stuff most 4th gen people do:

GSR center console (but i have both GSR pieces and the original civic piece all molded together, no seams)

2nd gen integra front brakes and CRX Si rear brakes

b16a1 engine swap

heres where it gets weird:

CRX front end conversion


97+ prelude tail light conversion (before any molding in this pic)


completely molded 6 piece bodykit (it is now, wasnt in the pictures)

shaved emblems, squirters, antenna, rain gutters, rear hatch center reflector, and hatch lock (is now, wasnt in the pics. ill update soon)

JDM S1 tranny internals in a USDM YS1 tranny

Recaro seats from an early 90s Jetta

fully rewrapped interior with black vinyl and red suede (heres the dash)


JDM Integra Type-R MOMO steering wheel

this list will get outta control quick, imma stop

[civicHBsi91]

cleared the bumper lights *easiest thing on earth*
painted my emblems black.....umm yeah not too extensive *all of my money went to engine work and getting the car in great shape*

and that steering wheel is hot, how does it go on? do you need a special hub?

[MyFirst4G]

Originally posted by civicHBsi91
and that steering wheel is hot, how does it go on? do you need a special hub?

Yea, i wanna know also, because i've seen them on eBay on;y for the 6th gen civics and 3rd gen tegs.........

[slammed89civic]

well, when i had my civic i rigged up the auto headlight unit from a ford taurus, so i never had to mess with my headlights

[EF You]

its bolt on man, no modifications necessary. it slips right onto the column, and the only difference i could find was that the splines in the steering wheel didnt go into the wheel as deeply as the stock one did. but it doesnt matter, cause theres enough spline in there to get a good grip on the shaft. and everything else fit, like the horn wire and all. looks damn good on the column. ill have to go take pictures soon in my storage building, cause i got lots of stuff in there im working on