Nuts

[butch h]

I went to move the wifes '94 Seville and when I stepped on the brake pedal it went to the floor.The line from the mastercylinder front brakes,tothe corresponding port on the anti-lock module had rusted through.I removed the nut at the mastercylinder with no problem,but the one on the anti-lock was different story.I was able to remove it eventually,but it is in pretty poor condition.No problem I thought.Wrong!,the nut is 11 mmX1.0 pitch 3/16" line.No one seems to have this particular configuration.Does anyone know of a source?
Thanks ,Butch.

[maxwedge]

Check with Napa for adapters or an actual metric line.

[butch h]

Thanks for the response,but believe me ,I have checked all local NAPA's,Advanced,etc.-with no success.There are 3/16 pipe x 11mm x 1.5 pitch nuts everywhere,but no 11 x 1.0.I have,in my brake hardware drawer three correctly threaded nuts,but they are for the "double" flare,not the "ISO bubble" flare.I thought about trying to modify one,but these are the short nuts and I'm not optimistic of success.I am hoping some one will look at his/her collection and find one-I don't believe there made now.
Thanks,Butch