|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-13-2008, 12:14 PM
|
|||
|
|||
|
Are these mounts all I need?, (97 GSR b18c1 into 94 civic hatch)
I found these mounts on ebay and they say they have a lifetime warranty so I figure they can't be that bad.
Anyways, I don't have any of the mounts from the donor integra. I am planning a full axle to axle swap from a 97 GSR into a 94 civic hatch. Are these three pieces all I will need to get it done? Thanks. http://cgi.ebay.com/ebaymotors/B-Ser...QQcmdZViewItem
__________________
"Have you ever noticed? Anybody going slower than you is an idiot, and anyone going faster than you is a maniac." -George Carlin. "My neighbour asked if he could use my lawnmower and I told him of course he could, so long as he didn't take it out of my yard." 
|
|
#2
03-13-2008, 01:06 PM
|
||||
|
||||
|
Re: Are these mounts all I need?, (97 GSR b18c1 into 94 civic hatch)
Check out your engine and make sure you have a 3 stud drivers' side mount bracket attached to the engine, and not a 2 stud bracket. Personally I wouldn't buy those though. That drivers' side mount looks like crap, and I wouldn't trust it to hold regardless of the lifetime warranty or not. You could just go to a local junk yard and try to get a matching Integra drivers' side mount (2 hole or 3 hole), you could use the rest of the stock Civic mounts. You're also going to need an Integra rear mount bracket. If you have A/C and want to keep it, you're going to need a Del Sol VTEC (the one with the B16) A/C bracket.
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
