|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-04-2005, 09:47 AM
|
|||
|
|||
|
Clear Coat Adhesion
I have just sprayed PPG base and DCU 2021 clear on my car. I have sanded the clear with 1200 sandpaper. I need to spray black hood and rear deck stripes over the clear then add 2 more coats of clear over everything. My question is do I need to use an adhesion promoter or is sanding with 1200 grit paper good enough?
|
|
#2
04-04-2005, 12:40 PM
|
||||
|
||||
|
Re: Clear Coat Adhesion
You should have used and interclear. I've never done it like that myself, but I've seen it done before with no problems.
__________________
-Mike AF Director of Media / Photographer  [email protected] | AutomotiveForums.com | Flickr Gallery
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
