|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
hows it going guys, i just bought a crx and the runk is getting water in it, i looked back tehre and inside the light housings have water in them so thats where the water is coming in from. all the bolts are tight so why is it leaking???
|
|
#2
|
|||
|
|||
|
Re: CRX REAR Lights leaking
somebody? anybody??
|
|
#3
|
||||
|
||||
|
Re: CRX REAR Lights leaking
Let's try the CRX forum
![]() Edit: did not know what year you have, but the most popular ones are the 88-91 so we will try that forums first, let me know if it is an older one and I will move it to the other CRX forum.
__________________
|
|
#4
|
|||
|
|||
|
There is a gasket that goes around the light housing. Probably just need to replace that. Also, do you have any holes in the tail lights?
P.S. I'm talking about the tail lights here. If you're talking about the dome light, that's something else. |
|
#5
|
|||
|
|||
|
you know im getting water in my lights too. the crx isnt running and i just swapped out the lights for some 90's and those get water in them too.. how to stop??
|
|
#6
|
||||
|
||||
|
My crx leaked into the hatch when I got it.. wasn't my tail lights though, it was the rubber trim thing in the hatch..I just got a new one from a junkyard and put it in..no more leaks
![]() But if it's your tail lights for sure..try what they said about the gasket behind the lights then if that doesn't work and you can't see any cracks in your lights try putting some silicon sealer or something around the seams on the tail lights. And just outta curiosity you don't have "after market tails" do you? lol
__________________
|
|
#7
|
|||
|
|||
|
no i dont... the tail lights are from a 90, my car's an 89.. i reversed the gaskets on them when i put them in put the left one on the right and the right one on the left i thought that would stop it. Because the 89 lights would get a puddle inside the lights, now the ninty's do. i think its right above the light. i dont know.. maybe i should just try new gaskets. i dont see how that would stop it though
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
| Thread Tools | |
|
|