modding a prowler

[SilverLotus340R]

if you lowered a prowler .. would it turn?

[badassgremlin]

if you only lowered the rear yes

[sub006]

I would love to see a prowler with large diameter (stock sizes) polished alloy wheels that look like chrome reversed rims with baby moons. Then have a custom tire shop add wide whitewalls to your performance radials. A little hand pinstriping and instant '62! Bet you'd get thumbs ups everywhere!

[Xix OWN3D xiX]

My dad has an 02' prowler. It's yellow, and i think it would hurt to lower it...for the simple fact that the nose is about 4 inches from the ground. Haha. Once when eating at Applebee's before a prowler parade, a lady wrecked the litte nose under the grill into a curb. HA! So not a good idea to lower... taking the bumpers off and adding a sick system is all the modding u need man!

[G-man422]

It's true, you should only lower the rear.

[Venomz]

Originally Posted by Xix OWN3D xiX

..taking the bumpers off and adding a sick system is all the modding u need man!

Doing some engine work wouldn't hurt awefully either. The Crossfire has the same engine and, for what the cars are supposed to be, it's somewhat disappointing. Chrysler seems to have a habit of this, minus the 300M.

If you wanted to give the car the appearance of being lower, you'd want to custom fab new front wheel-wells and go bigger on the rims, and lower the car accordingly, so that you maintain the 4 inch clearance.

[Venomz]

Pardon, I didn't mean the 300M, but rather the new Hemi 300, I think called the 300C?

[Samurai75007]

Originally Posted by Venomz

The Crossfire has the same engine

I don’t know what you’re talking about but the Prowler dose not have the same engine as the Crossfire. The Crossfire is a rescind MB SLK 230; if you look on the block for the Crossfire you see MB logo's everywhere.

[G-man422]

Originally Posted by Venomz

Pardon, I didn't mean the 300M, but rather the new Hemi 300, I think called the 300C?

Yes, the 300C.