|
For most GM's...
When you pull the headrest UP. At the top of the seat there should be a plastic bezel on each side where the headrest post goes down into the seat. On one of these bezels there will be a small hole (on the backside) just big enough for a (large size) straightend paper clip to fit through. Once you have the headrest in the upmost position, insert the paper clip in the hole, and push the clip in with a little force and hold it, then pull up on the rest and it should come out.
You may have to work at it a bit as it is can be difficult to get the paperclip positioned just right.
Hope this works for you, as it is the only way I know of to do it.
Welcome to AF
|