|
I worked a little bit with this stuff, so I think i can help you out. this simplest way that i can put it is that you will need a switch, (3 prong switch is good), some good wire, and a brain. the prong on your switch that says PWR or BTRY, will connect to a consant power source, such as a 12V on your consol or straight to the battery (if you are connecting straight to the batter, you will need to put an inline fuse in that wire.) The second prong should says something like ACC, this is where you hook up your neons to. The third prong is the GRD, which will connect to any bare piece of metal on your car. Remember to ground the switch and the neons to a different places. This should give you some idea. email me or reply if you need more help. peace :smoka:
|