|
I finally figured it out...Anyone else needing help with this here ya go!
1st insert key and turn to on position but dont start engine
2nd look under driver side dash for the data link connector ( just looks like a plug) look for connect pins 1 and 4 then get a jumper wire and jump pins 1 and 4 together. you will hear the horn and the doors will lock. While the pins are jumpered press your unlock button on the remotes you want programmed and the doors will lock and unlock.
3 lastly remove the jumper for pins 1 and 4 and your finished ...
Hope this helps some of you ....
:smoka:
|