View Single Post
  #4  
Old 04-23-2003, 11:49 AM
ev0lution7 ev0lution7 is offline
AF Regular
 
Join Date: Jan 2003
Posts: 183
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to ev0lution7 Send a message via AIM to ev0lution7 Send a message via Yahoo to ev0lution7
O M G stop spreading propaganda like that the ONLY thing different is the lower contorl arm and the upper control arm

http://photos.yahoo.com/bc/ev0lution...c=ph%26.view=t

ok the knuckle on the left is the teg one the knuckle on the right is the STD hatch (91) the knuckles i have are from a 93 acura integra they work my alignment is perfect (besides a little problem i had BEFORE the swap) my steering wheel pulls to the left but thats because i needed a alignment BEFORE the swap but if you changed ur outer tie rod ends YES u will need a alignment but if u use your STOCK control arms the camber is the SAME excatly the SAME ALSO the same is true for the rears when u do a rear disk swap it is the same u gotta use the civic parts (control arms from your civic the trailing arm from the teg) so i know this works cuz i have tried it infact i'm using the teg brakes RIGHT NOW they out stoped a 98ish accord EX last night and with my ZC i kicked his A$$ i droped from 5th to 2nd and made him cry (ha ha ha) he was stunned after i blew by him at about 80mph then continued to 100+ so my brakes work great at those speeds and i have ABSOLUTLY NO CAMBER PROBLEMS only my PREVIOUS alignment problems BEFORE the swap but those are nothing major OK

i hope that clears up the confusion
__________________
Crxce- theoretically if u laid a starter on a table and hooked up the wires would it run???

BLU CIVIC- no...it doesn't have any legs
Reply With Quote